How to Use A37 Oxford Blue Acrylic Powder for Nail Art

By 2GUYS NAIL | Published: 2026-10-24

Category: How-to Guides

Learn step-by-step how to apply A37 Oxford Blue acrylic powder for dipping or sculpting nail art, with tips to avoid common mistakes and get a smooth, vibrant finish.

Quick answer

A37 Oxford Blue acrylic powder works for both dipping and sculpting methods. Use a medium-setting monomer and apply thin, even layers for a bubble-free, vibrant finish.

Why A37 Oxford Blue works for nail art

This 2in1 acrylic powder is designed for both dipping and sculpting, so you can switch techniques without buying a separate product. Its fine texture helps you achieve an even-toned color and a smooth surface, which is especially important for bold blues where streaks or bubbles would be obvious.

The medium setting time gives you enough working time to shape the product before it hardens, but it’s not so slow that you wait long between layers. This balance makes it a practical choice for beginners and experienced nail artists alike.

What you need before starting

You’ll need A37 Oxford Blue acrylic powder, a compatible monomer (preferably medium-setting), a brush, a dappen dish, nail primer, and a top coat. For the dipping method, also have a dipping base coat and activator. For sculpting, use nail forms or tips.

Make sure your nail surface is clean, dry, and lightly buffed so the acrylic adheres well. Skipping prep is the most common cause of lifting.

Step-by-step application guide

Prepare your nail and brush: Push back cuticles, buff the nail surface lightly, and apply a thin coat of primer. Dip your brush into monomer, then wipe one side on the dappen dish to remove excess liquid. A brush that is too wet will cause the powder to slide or pool. Common mistake: using too much monomer leads to bubbles and uneven thickness. The brush should be moist, not dripping.
Pick up the acrylic bead: Touch the damp brush to the A37 Oxford Blue powder to form a small bead. Roll the bead on the dappen dish until it has a satin sheen. For dipping, skip this step and instead apply a thin layer of dipping base coat, then dip the nail into the powder. Checkpoint: If the bead looks wet or runny, your brush has too much monomer. Wipe and try again.
Apply the first layer: Place the bead near the cuticle and gently press it toward the free edge using a patting motion. Keep the layer thin and even. For dipping, tap off excess powder after dipping and brush away loose particles. Common mistake: pressing too hard or moving the brush back and forth can trap air and create bubbles. Use light, consistent pressure.
Shape and refine: Once the acrylic is firm but not fully hard, use a brush dipped in monomer to smooth the surface and define the shape. Work quickly — the medium setting time gives you about 30–60 seconds. For dipping, apply a second thin layer of base coat and dip again if needed. Checkpoint: If the acrylic becomes too hard to shape, you waited too long. Next time, start shaping earlier.
Finish and seal: After the acrylic is fully cured, file and buff the nail to your desired shape and smoothness. Wipe away dust, then apply a top coat to lock in the color and add shine. Cure or air-dry according to your top coat instructions. Common mistake: skipping the top coat leaves the color dull and prone to chipping. A clear top coat makes the blue pop.

Product facts

A37 OXFORD BLUE POWDER: Our 2Guys 2in1 Acrylic Powder System is developed to be used in both dipping and sculpting methods. You can use the same powder for either technique, reducing waste and simplifying your kit.
A37 OXFORD BLUE POWDER
A37 OXFORD BLUE POWDER: It’s designed to create vibrant colors and strong adhesive. Our acrylic’s medium setting time and fine texture provide great workability to achieve an even-toned color, bubble free and smooth surface. The fine texture helps you avoid bubbles and streaks, giving you a professional-looking solid blue finish.